Linksys router is the perfect networking gadget for obtaining seamless internet connectivity. But sometimes just like other tech gadgets the Linksys router also likes to throw some tantrums. One of them is the Red Light on Linksys router. The red light issue is very common for the Linksys users but in case you are a new user then do not panic as this issue is not complex to solve. As you read the whole guide, you'll be easily able to solve the issue, even if you are not tech friendly. So without any unnecessary delays let's begin. 

Meaning Of Red Light On Linksys Router

When there is no internet connection then the red light pops up on the Linksys router. But this is not necessary, sometimes due to hardware failure also the red light issue arises. Now there are two different scenarios. In the case of solid red light the meanings are as written above. But if you own a mesh Linksys router then the blinking red light means the defective connection between the parent node and the child node. Now as the meaning is clear, let's check out the various troubleshooting methods. 

✓ Ensure Proper Hardware Connection 

Want to fix the red light on Linksys router? If yes then firstly ensure right hardware connectivity. Start by checking the power supply to the router. It should be consistent and uncut. If the power supply is proper the power LED should light up. If it's not then replace the power adapter or use a different power socket. 

Moving further, ensure the modem is on and has an active internet connection. Now the modem and the Linksys router’s connection is important. For connecting both the gadgets use a properly working ethernet cable. The cable should be using the right ports. The placement of both the devices should be nearby to each other without any physical barriers in between. 

✓ Right Configuration Is Necessary 

Next, incorrect configuration won't allow the Linksys router to get access to the internet service from the modem. Therefore the red light on Linksys router issue arises. The correct and step by step configuration process for your reference is given here:

• Start by turning on both the gadget that is the modem and the Linksys router. Now let the devices start up properly. This may take up to a few seconds or a minute.

• Next, fetch a properly working ethernet cable. Attach both its ends into the right ports of both the devices. 

• Thereafter select a smart gadget for beginning with the configuration. Following this, connect the client device to the Linksys router. There are two options. One is wireless, the details for which are written on the router's product label. For hassle free connectivity use the ethernet wire. 

• After the connection building with the device, open an internet browser. Head to the address bar. Fill up http://192.168.1.1. Press Enter. 

• Lastly, follow the on-screen directions to connect to the internet.

✓ Restarting The Gadgets Can Help

Due to continuous usage and overheating the red light on Linksys router can pop up. So to resolve this, one of the quickest and simplest methods is to re-start the devices. All you need to do is withdraw the electrical supply from the gadgets including the modem. For this, unplug from the power socket. Let the devices cool down to room temperature, thereafter replug and turn on. Instantly the red light will no longer be visible. But if it's still there, then head towards the next helping point. 

✓ Router's Outdated Firmware Is The Issue

How long has it been when you checked for the pending firmware updates of the Linksys router? Many users forget to check the same thus they end up facing various issues including the red light on Linksys router. Pending updates can easily hamper the performance of Linksys routers. Therefore it's important to always have the latest firmware installed as it also secures the network and provides seamless functionality. 

For updating first login into the router. For this either use the Linksys app or an internet browser. As you get access to the main dashboard, move to the Firmware Upgrade section. Follow the on-screen prompts stepwise to update the firmware. During the process the router may reboot itself, so do not panic as well, don't turn off the router or perform any other activity on it. As this can cause irreparable damage. Therefore as the updation process completes, the red light will doze off. 

✓ Connect To ISP

There can be a possibility of an internet outage in your specific area. Therefore in this scenario none of the above solutions will solve the red light on Linksys router issue. To know about the same, you need to connect with your Internet Service Provider. The provider will provide the information on the same. 

✓ Nothing Works? Reset !

If the hardware connectivity, configuration, updation everything is perfect as per you, then the only option left is reset. Resetting means turning the router back to its original settings. For resetting you need a paper clip. Just insert it inside the reset hole, press and hold until the power goes off from the router and release. Finally redo the setup from scratch. 

If still the red light on Linksys router is lit up then there are chances of hardware failure, for this it's better to take the help of experts.